Hard Drive DVD Recorder firmware downloads
Here you can download firmware updates for your Pioneer Hard Drive DVD Recorder.
Select the download that matches exactly with the model number located top right on the front panel and follow the instructions.
| Model | Firmware Link |
|
|
|
|---|---|---|---|---|
| DVR-LX70D |
DVR_LX70D.zip size: 10200 KB |
|
|
|
| DVR-LX70D - LX01 | DVR_LX01.zip size: 10.745 KB |
|
|
|
| DVR-LX61D |
DVR_LX61D.zip size: 14.824KB |
|
|
|
| DVR-LX61 |
DVR_LX61.zip size: 14.824KB |
|
|
|
| DVR-LX60D |
DVR_LX60D.zip size: 10.526KB Also see how to use HDMI Control. |
|
|
|
| DVR-LX60 |
DVR_LX60.zip size:10.526KB Also see how to use HDMI Control. |
|
|
|
| DVR-940HX | DVR_940HX.zip
size: 7.329KB |
|
|
|
| DVR-645H-S |
DVR 645H.zip size: 6173 KB |
|
|
|
| DVR-640H-S |
DVR_640H.zip size: 5900 KB |
|
|
|
| DVR-630H |
DVR_630H.zip size: 10321 KB Use these download instructions. |
|
|
|
| DVR-560HX |
DVR_560HX.zip size:14.824KB |
|
|
|
| DVR-560H |
DVR_560H.zip size:14.824KB |
|
|
|
| DVR-555HX |
DVR_555HX.zip size: 10.526KB |
|
|
|
| DVR-555H |
DVR_555H.zip size: 10.526KB |
|
|
|
| DVR-550HX |
DVR_550HX.zip size: 10.526KB Also see how to use HDMI Control. |
|
|
|
| DVR-550H |
DVR_550H.zip size: 10.526KB Also see how to use HDMI Control. |
|
|
|
| DVR-545HX-S |
DVR545HX_v221.zip size: 7318 KB |
|
|
|
| DVR-545H-S |
DVR545H_v416.zip size: 5990 KB |
|
|
|
| DVR-540HX |
DVR_540HX_v134.zip size: 6815 KB |
|
|
|
| DVR-540H-S |
DVR_440H_540H.zip size: 6815 KB |
|
|
|
| DVR-530H |
DVR_530H.zip size: 10321 KB Use these download instructions. |
|
|
|
| DVR-440HX |
DVR440HX_v134.zip size: 6815 KB |
|
|
|
| DVR-440H-S |
DVR_440H_540H.zip size: 5659 KB |
|
|
|
| DVR-433H |
DVR_433H.zip size: 8981 KB Use these download instructions. |
|
|
|
| DVR-RT602H-S | DVR-RT602H.zip |
|||
| DVR-RT601H-S | DVR-RT601H.zip size:10.188 KB |
To check and install a new firmware just follow the six easy steps below:
1. Check the current Firmware Version (not applicable for DVR-433H/530H/630H/RT601H):
- Switch on your DVD Recorder
- Select "Home Menu"
- Select "Initial Settings"
- Select "Audio Out"
- Select "Dolby Digital Out"
- Select "Dolby Digital" and push the "9" button on the remote
- Remember, you'll only need to update your DVD Recorder if the FW version is lower than the version mentioned in the download table.
- To return the DVR to its normal operating state, press the Home Menu button on the remote control.
2. Download the Update:
- Click on the filename in the above download table to start your download
- If your browser does not automatically start the download process, be sure that your browser or security software is set to allow downloading of files from this web site.
- You can also right-click the button and select "Save Target As" to start the download process.
3. Check the Firmware File
- Check the file size (see table) of the downloaded firmware file xxyyzz.zip
by right-clicking on the file and selecting Properties. (Download again if
the file size is incorrect.)
4. Decompress the file
Once you have downloaded the file to your computer, locate the file on your hard disk drive and double click the file to decompress it. (If you do not have a decompression utility installed on your computer, you can easily download one for free.)
5. Create the Update Disc
- It is important to use a good quality branded blank CD-R disc or completely erased CD-RW disc.
- Create the update disc by burning the file to a CD-R or CD-RW disc.
- Burn the decompressed file to the disc using disc-at-once mode (2x Speed) and ISO 9660 CD-ROM file system format. (The player will not recognize the update disc and the update cannot be performed if the file is not burned correctly to the disc.)
- Make sure that the disc session is closed / the disc is finalised.
6. Update your device
- Update the firmware using the CD-R or CD-RW disc containing the firmware file.
- Perform the update following the procedure given in the PDF DVD Recorder Update instructions.
- Note: Do not turn off or disconnect power, or remove a disc while the update is in progress