Home > Support > DVJ-1000 Software Update

DVJ-1000 Software Update

Here you can download an update for your DVJ-1000. The update will improve the Master Tempo performance and readability of dirty or scratched discs.

You'll only need to update your DVJ-1000 if it has a System Version lower than 1.50.

Just follow the five easy steps below:

Turn the player on.
Keep pressing RELOOP/EXIT button for over 10 seconds. Main version is displayed on FL display. After that, drive firmware version can be seen by pressing cursor( ->) button.
Remember, you'll only need to update if your System has a Version lower than 1.50.
To return the DVJ-1000 player to its normal operating state, turn the player off and then on again.

Click on the button below to start your download
The file is 4.68MB and was released on 17 January 2007
If your browser does not automatically start the download process, be sure that your browser or security software is set to allow downloading of files from this web site.
You can also right-click the button and select “Save Target As” to start the download process.

Check the size (4.68MB) of the downloaded firmware file ‘DVJ1000_V1.50.iso’ by right-clicking on the file and selecting Properties. (Download again if the file size is incorrect.)

It is important to use a good quality branded blank CD-R disc or completely erased CD-RW disc.
Create the update disc by burning the file to a CD-R or CD-RW disc.
Burn the file to the disc using disc-at-once mode (2x Speed) and ISO 9660 CD-ROM file system format. (The player will not recognize the update disc and the update cannot be performed if the file is not burned correctly to the disc.)
Make sure that the disc session is closed / the disc is finalised.

Update the firmware using the CD-R or CD-RW disc containing the firmware file.
Perform the update following the procedure given in the PDF DVJ-1000 Update instructions
Note: Do not turn off or disconnect power, or remove a disc while update is in progress