Home > Support > FAQ > Television - KURO > question / answer

FAQ - Television - KURO

Which PC resolutions are supported by Pioneer home plasmas?

If I put a signal into the PC input of my plasma that has a resolution which is not mentioned in the chart, then there is a pop-up that says 'input signal is not supported'. (If the PC is HDCP ready you can connect it via HDMI.)
Set your PC to another setting. Please check the attached list for possible signals.

Most plasma systems introduced after October 2003 have VGA inputs but please note that the PDP-435FDE , PDP-436SXE , PDP-436RXE , PDP-436FDE ,PDP-506FDE , PDP-4270XD , PDP-4270XA,PDP-42RXE systems DO NOT have a VGA input and DO NOT support any type of PC video signal via the HDMI input either.
Links

PC

Still need your question answered?

Contact your nearest Pioneer office or local distributor.

Rate this page: