GM-6300F 4-channel Bridgeable Power Amplifier (120W)

A 30cm sub that is just 8.2cm deep - now you can boost your car audio with 1400 Watts of pure, solid bass of a superior sub without a complex installation.

Designed for enclose use, the TS-SW1241D combines the interlaced glass/carbon fibre reinforced IMPP (Injection-Moulded Polypropylene) double cone and our unique damper-less air suspension excursion control system.

A typical sub uses a damper to control the woofer’s cone excursion. Our air suspension system creates a sealed air space between the double cones, effectively replacing the damper and providing superior compliance linearity - regardless of the volume input - for reproducing exceptionally clear, low distortion bass sound.

• A shallower sub - just 6.25cm deep - is also available. Although it delivers a more modest power output of 500W, it uses the same Air Suspension Excursion Control System.

More details

A powerful 25cm sub that is just 7.5cm deep.

Now you can boost your car audio with 1000 Watts of pure, solid bass of a superior sub without a complex installation.

Designed for enclosed use, the TS-SW1041D combines the interlaced glass/carbon fibre reinforced IMPP (Injection-Moulded Polypropylene) double cone and our unique damper-less air suspension excursion control system.

A typical sub uses a damper to control the woofer’s cone excursion. Our air suspension system creates a sealed air space between the double cones, effectively replacing the damper and providing superior compliance linearity - regardless of the volume input - for reproducing exceptionally clear, low distortion bass sound.

This sub is also available in a larger 30cm version (at 1400W) or smaller 20cm version (at 500W).

More details

Here's a 20cm sub that is just 6.25cm deep - now you can boost your car audio with the pure, solid bass of a superior sub without a complex installation.

Designed for both enclose and free-air use, the TS-SW841D combines the interlaced glass/carbon fibre reinforced IMPP (Injection Moudled Polypropylene) double cone and our unique damper-less air suspension excursion control system.

A typical sub uses a damper to control the woofer’s cone excursion. This air suspension system creates a sealed air space between the double cones, effectively replacing the damper and providing superior compliance linearity - regardless of your volume input - for reproducing exceptionally clear, low distortion bass sound.

• A slightly larger sub, but still just 8.2cm deep (and delivering 1400W of power) , is also available.

More details

Ultimate connection flexibility.

The TS-W307D4 offers you a variety of set-up possibilities (8Ω or 2Ω), provided that there is correct power matching between the subwoofer and your amplifier.

So, whether you are building your system from an existing stereo or mono amp, or whether you want a basic set-up with expandability potential, the TS-W307D4 will cover common impedance loads.

The IMPP™ (Injection Moulded Polypropylene) cone is constructed from a composite blend of interlaced Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.

The speaker terminals have been placed on one side of the subwoofer, rather than on both sides as with conventional subs; this gives you greater installation flexibility.

The TS-W307D4 is for enclosed use and is also available as a 30cm 2Ω dual voice coil model.

More details

Ultimate connection flexibility.

The TS-W307D2 offers you a variety of set-up possibilities (4Ω or 1Ω), provided that there is correct power matching between the subwoofer and your amplifier.

So, whether you are building your system from an existing stereo or mono amp, or whether you want a basic set-up with expandability potential, the TS-W307D2 will cover common impedance loads.

The IMPP™ (Injection Moulded Polypropylene) cone is constructed from a composite blend of interlaced Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.

The speaker terminals have been placed on one side of the subwoofer, rather than on both sides as with conventional subs; this gives you greater installation flexibility.

The TS-W307D2 is for enclosed use and is also available as a 30cm 4 Ω dual voice coil model.

More details

Low distortion, powerful bass.

Incorporating a number of the technologies used in our SPL range of subs, this free-air sub guarantees a complete audio experience, reaching the very depths of your bass frequencies.

The Injection Moulded Polypropylene (IMPP™) cone is constructed from a composite blend of interlaced, Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.

See a cut view diagram of this subwoofer

More details

Ultimate connection flexibility.

The TS-W257D4 offers you a variety of set-up possibilities (8Ω or 2Ω), provided that there is correct power matching between the subwoofer and your amplifier.

So, whether you are building your system from an existing stereo or mono amp, or whether you want a basic set-up with expandability potential, the TS-W257D4 will cover common impedance loads.

The IMPP™ (Injection Moulded Polypropylene) cone is constructed from a composite blend of interlaced Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.

The speaker terminals have been placed on one side of the subwoofer, rather than on both sides as with conventional subs; this gives you greater installation flexibility.

The TS-W257D4 is for enclosed use and is also available as a 25cm 2 Ω dual voice coil model.

More details

Ultimate connection flexibility.

The TS-W257D2 offers you a variety of set-up possibilities (4Ω or 1Ω), provided that there is correct power matching between the subwoofer and your amplifier.

So, whether you are building your system from an existing stereo or mono amp, or whether you want a basic set-up with expandability potential, the TS-W257D2 will cover common impedance loads.

The IMPP™ (Injection Moulded Polypropylene) cone is constructed from a composite blend of interlaced Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.

The speaker terminals have been placed on one side of the subwoofer, rather than on both sides as with conventional subs; this gives you greater installation flexibility.

The TS-W257D2 is for enclosed use and is also available as a 25cm 4 Ω dual voice coil model.

More details

Low distortion, powerful bass.

Incorporating a number of the technologies used in our SPL range of subs, this free-air sub guarantees a complete audio experience, reaching the very depths of your bass frequencies.

The Injection Moulded Polypropylene (IMPP™) cone is constructed from a composite blend of interlaced, Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.

More details

The benchmark in passive box subs.

Constructed with thick MDF board for assured strength and stability, the WX301 bass reflex sub has a well-tuned bass reflex port to reproduce powerful bass tones.

The Injection Moulded Polypropylene (IMPP™) cone is constructed from a composite blend of interlaced, Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.

The WX301 has an extended, vented pole yoke, delivering a vast improvement in linearity.

More details