Home > Products > Car Entertainment > Amplifier > PRS-D420
PRS-D420 4 Channel Class-FD Amplifier (4 x 150W / 2008 Model)
Car Audio
-
DEH-P88RS-II Reference Series CD Tuner (2008 Model, Black)
The basis for pure sound staging in your car.The DEH-P88RSII comes from the pedigree of the Pioneer Reference Series – driving pure sound staging in your car.
Audio reproduction is competition-grade. The high performance DSP, 24-bit Burr-Brown Advanced Segment-Type DAC and digital Low Pass and High Pass Filters for both 2 and 3-way audio, deliver crystal audio quality with extremely low levels of noise. The DEH-P88RSII shares the same op-amp (operational amplifier) as our
The unit features a Hi-Volt Output (5V), which provides a stronger signal to amp - again, with less noise and more definition. To optimise sound image, staging and frequency response, the DEH-P88RSII uses automatic time alignment and equalisation to adjust the audio settings.
PRS-D amplifiers, making a perfect pairing for high quality sound.
The tuner also features D4Q+ technology, which delivers advanced FM/AM stereo reception with noise reduction, eliminating external interference.This unit combines refined style - with a motorised aluminium face plate and white OEL screen - and high quality components. It’s the audiophile’s in-car CD tuner.
Car speakers
-
A subwoofer that can handle real power and equipped with the Voice Coil Cooling System (VCCS), which together with a giant magnetic circuit, draws heat away from the inside of the sub, so that the sound stays natural and your subwoofer keeps its cool. There's also a 3” (76 cm) dual layer long voice coil (2 x 4 ohm) that, combined with the extremely light Aramid Fibre Composite Cone, results in a very strong moving force. -
TS-W3001D4 30cm 4Ω SPL Champion Series Sub (3000W)
Competition-class sub: all the power in less enclosure space
A major benefit of this sub is its Air Suspension System, which creates an airtight space between the two cones within. This enables the main cone to move solidly and smoothly, reflecting air pressure from the enclosure. The result is a very tight bass; even in a very small enclosure.
The Injection Moulded Polypropylene (IMPP™) cone is constructed from a composite blend of interlaced, Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels. The TS-W2501D4 offers you a variety of set-up possibilities (8Ω or 2Ω), provided that there is correct power matching between the subwoofer and your amplifier
-
TS-W2501D4 25cm 4Ω SPL Champion Series Sub (2500W)
Competition-class sub: all the power in less enclosure space
A major benefit of this sub is its Air Suspension System, which creates an airtight space between the two cones within.The result is a very tight bass; even in a very small enclosure.
The Injection Moulded Polypropylene (IMPP™) cone is constructed from a composite blend of interlaced, Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels. -
TS-SW1241D Shallow-Type Subwoofer
A 30cm sub that is just 8.2cm deep - now you can boost your car audio with 1400 Watts of pure, solid bass of a superior sub without a complex installation.
Designed for enclose use, the TS-SW1241D combines the interlaced glass/carbon fibre reinforced IMPP (Injection-Moulded Polypropylene) double cone and our unique damper-less air suspension excursion control system.
A typical sub uses a damper to control the woofer’s cone excursion. Our air suspension system creates a sealed air space between the double cones, effectively replacing the damper and providing superior compliance linearity - regardless of the volume input - for reproducing exceptionally clear, low distortion bass sound.
• A shallower sub - just 6.25cm deep - is also available. Although it delivers a more modest power output of 500W, it uses the same Air Suspension Excursion Control System. -
TS-SW1041D 25cm Shallow-Type Sub (1000W)
A powerful 25cm sub that is just 7.5cm deep.
Now you can boost your car audio with 1000 Watts of pure, solid bass of a superior sub without a complex installation.
Designed for enclosed use, the TS-SW1041D combines the interlaced glass/carbon fibre reinforced IMPP (Injection-Moulded Polypropylene) double cone and our unique damper-less air suspension excursion control system.
A typical sub uses a damper to control the woofer’s cone excursion. Our air suspension system creates a sealed air space between the double cones, effectively replacing the damper and providing superior compliance linearity - regardless of the volume input - for reproducing exceptionally clear, low distortion bass sound.
This sub is also available in a larger 30cm version (at 1400W) or smaller 20cm version (at 500W).
-
TS-SW841D Shallow-Type Subwoofer
Here's a 20cm sub that is just 6.25cm deep - now you can boost your car audio with the pure, solid bass of a superior sub without a complex installation.
Designed for both enclose and free-air use, the TS-SW841D combines the interlaced glass/carbon fibre reinforced IMPP (Injection Moudled Polypropylene) double cone and our unique damper-less air suspension excursion control system.
A typical sub uses a damper to control the woofer’s cone excursion. This air suspension system creates a sealed air space between the double cones, effectively replacing the damper and providing superior compliance linearity - regardless of your volume input - for reproducing exceptionally clear, low distortion bass sound.
• A slightly larger sub, but still just 8.2cm deep (and delivering 1400W of power) , is also available. -
TS-W307D4 30cm 4Ω C-Type Dual Voice Coil Subwoofer (1200W)
Ultimate connection flexibility.
The TS-W307D4 offers you a variety of set-up possibilities (8Ω or 2Ω), provided that there is correct power matching between the subwoofer and your amplifier.
So, whether you are building your system from an existing stereo or mono amp, or whether you want a basic set-up with expandability potential, the TS-W307D4 will cover common impedance loads.
The IMPP™ (Injection Moulded Polypropylene) cone is constructed from a composite blend of interlaced Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.The speaker terminals have been placed on one side of the subwoofer, rather than on both sides as with conventional subs; this gives you greater installation flexibility.
The TS-W307D4 is for enclosed use and is also available as a 30cm 2Ω dual voice coil model.
-
Low distortion, powerful bass.
Incorporating a number of the technologies used in our SPL range of subs, this free-air sub guarantees a complete audio experience, reaching the very depths of your bass frequencies.
The Injection Moulded Polypropylene (IMPP™) cone is constructed from a composite blend of interlaced, Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels. See a cut view diagram of this subwoofer
-
TS-W257D4 25cm 4Ω C-Type Dual Voice Coil Subwoofer (1000W)
Ultimate connection flexibility.
The TS-W257D4 offers you a variety of set-up possibilities (8Ω or 2Ω), provided that there is correct power matching between the subwoofer and your amplifier.
So, whether you are building your system from an existing stereo or mono amp, or whether you want a basic set-up with expandability potential, the TS-W257D4 will cover common impedance loads.
The IMPP™ (Injection Moulded Polypropylene) cone is constructed from a composite blend of interlaced Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.The speaker terminals have been placed on one side of the subwoofer, rather than on both sides as with conventional subs; this gives you greater installation flexibility.
The TS-W257D4 is for enclosed use and is also available as a 25cm 2 Ω dual voice coil model.
-
TS-W257D2 25cm 2Ω Dual Voice Coil Subwoofer (1000W)
Ultimate connection flexibility.
The TS-W257D2 offers you a variety of set-up possibilities (4Ω or 1Ω), provided that there is correct power matching between the subwoofer and your amplifier.
So, whether you are building your system from an existing stereo or mono amp, or whether you want a basic set-up with expandability potential, the TS-W257D2 will cover common impedance loads.
The IMPP™ (Injection Moulded Polypropylene) cone is constructed from a composite blend of interlaced Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.The speaker terminals have been placed on one side of the subwoofer, rather than on both sides as with conventional subs; this gives you greater installation flexibility.
The TS-W257D2 is for enclosed use and is also available as a 25cm 4 Ω dual voice coil model.
-
Low distortion, powerful bass.
Incorporating a number of the technologies used in our SPL range of subs, this free-air sub guarantees a complete audio experience, reaching the very depths of your bass frequencies.
The Injection Moulded Polypropylene (IMPP™) cone is constructed from a composite blend of interlaced, Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels. -
TS-WX301 Bass Reflex Sub (800W)
The benchmark in passive box subs.
Constructed with thick MDF board for assured strength and stability, the WX301 bass reflex sub has a well-tuned bass reflex port to reproduce powerful bass tones. The Injection Moulded Polypropylene (IMPP™) cone is constructed from a composite blend of interlaced, Aramid fibres, which make it extremely rigid; yet lightweight, for low distortion and powerful bass at high sound press levels.
The WX301 has an extended, vented pole yoke, delivering a vast improvement in linearity.
