S-FL1 Flat Panel Speaker

general


  • • Speaker Type Flat Panel: Open Back Type NXT
    • Frequency Response: 60 - 16,000 kHz
    • Sensitivity: 90 dB
    • Max Input Rating: 240W
    • Max Output Rating (Continuous): 111dB
    • Max Output Rating (Peak): 114dB
    • Impedance: 8 ohm
    • Magnetic Shielding: Yes
    • Input Connector: 2 x Speakon / Neutrek
    • Enclosure: Aluminum die cast and extrusion material
    • Weight: 9.9kg
    • Mounting All peripheral sides: (M8 x 2) x4
    • Dimensions (WxHxD): 675 x 500 x 55
    • Warranty: 1 year

    If you’re ever in doubt that the pair of HDJ-1000 headphones you’re about to buy are the real thing – here’s a quick check list that will give you comfort that you’re getting one of the best pair of headphones around…


    • Check the Logo:
    The letter “o” in our logo is always a perfect oval, just like in the picture below. If your headphones have a round “o” – they’re most likely dodgy.
    Oval O in the Pioneer logo


    • Check the hinges:
    Ours are always silver, as shown below. Black hinges mean fake.
    Silver left hinge Silver right hinge


    • Check the black headband section: – it must extend all the way to towards the hinges. Fake copies have a black headband that extends only a very short way down.


    • Finally – check the audio quality: if it’s poor and not the high quality you’d expect from us… then it’s most likely not a Pioneer pair.

    If you need any further advice or help, contact your nearest authorized dealer or call your local Pioneer office.

    Good luck and enjoy your real set of headphones

Own this product? Register it now!

Share | Send to a friend | Add to wishlist | Print | Where to buy