PRS-D1200SPL Competition Class SPL Class-D Amplifier (2400W)

Print page | Home | back

PRS-D1200SPL




Trusted for maximum, stable and reliable power

Designed to match our first-class SPL subwoofers, our SPL Chamption Edition amps continuously break world records, pushing beyond the 180dB barrier.

They manage to do this by incorporating the very best in audio technology, to give you rock-solid, reliable power.

The D1200 delivers 1 x 2400W at 1Ω, 1 x 2000W at 2Ω and 1 x 1000W at 4Ω.

IRRP Power SupplyThe D1200 includes an Independent Rail Regulating Power (IRRP) supply. This power supply structure regulates the positive and negative rail voltages separately, whereas most amplifiers regulate the positive rail alone.

The negative rail could destabilise during a crucial SPL moment, resulting in overall loss of performance; the IRRP boosts strength, so you can rely on the power when you need it most.

DAP CircuitryThe D1200 also includes a protective circuitry (DAP: Dynamic Amplifier Protection) that adapts to the output signal level. As a result, the protection level matches the operating condition of the moment. Again, DAP gives you extra reliability, even at higher output.

Highly efficient Class-D technology is part of the amplifier construction, as well. That means less current for less heat, with no distortion, so that your sound always stays pure, crisp and clear.


Specifications

Specifications PRS-D1200SPL
Maximum Output Power 1 x 2400W (1Ω), 1 x 2000W (2Ω), 1 x 1000W (4Ω)
Continuous power output (RMS)
• 1 x 1200W (50Hz/1Ω ≤ 2%THD)
• 1 x 1000W (50Hz/2Ω ≤ 1%THD)
• 1 x 500W (20Hz - 240Hz/4Ω ≤ 1%THD)
Load impedance capability 1 - 8Ω
Frequency response 10 - 240 Hz
Distortion < 0.3 %
S/N ratio > 80 dB
Bass Boost 40 - 120Hz
0, 6, 9, 12 dB via remote control
LPF 40 - 240Hz (-24 db/Oct)
Subsonic Filter 20Hz (-24 db/Oct)
MOSFET output section Yes
Sync Control Yes
RCA terminals Yes (input/output)
Speaker Terminals Block-type
High Voltage Input Capability 200 mV - 6.5 V V
Input level control 400 mV - 6.5 V
High performance balanced isolator circuit Yes
Max. current consumption (A/4Ω) 44A
Chassis size (W x H x D) 381 x 65 x 282 mm
Unit weight 6 kg


Print page | Home | back